300-HLD-5000

This holder has 2-1/4 (57 mm) bolt hole spacing. The bolt hole section is flat and has two sets of holes. The top set of holes should be used in almost all cases when mounting this holder to the shank. It fits on the Bourgault chisel plow shanks as well as the LH 755 shank used on the Morris Magnum III and the Morris Concept 2000.

This holder is designed to accept 1-1/8 inch (28 mm) O.D. air hose. For 1-1/4 inch (31 mm) O.D. airhose a bushing 300-BSH-1200 must be used. A self-tapping screw 911-SCR-1051 should be used to hold the air hose or the bushing into the seed boot holder. A 3/8 inch (9 mm) screw 911-SCR-1038 is also available to secure the air hose into the top of the bushing.

• See the 47° holder 300-HLD-4710
• See the 50° holder 300-HLD-5010
• See the 47° holder 300-HLD-4700
• Attachments: Spreader, Splitter, Straight, Knife, Knife.
• Read more about the whole quick change seed boot system